Contact us for samples, datasheets and technical support
Email: sales@huaandz.com
WhatsApp: +86 134 2790 5674
Website: www.huaandz.com
Location: Shenzhen, China

Your Current Location >Home > Products > Varistors > 34SK711 MOV Varistor
34SK711 MOV Varistor

34SK711 MOV Varistor

34SK711 is a 710V 34mm square MOV varistor designed for 440VAC / 585VDC surge protection circuits. It provides 50kA surge current capability, 1180V clamping voltage and strong energy absorption for SPD, industrial power systems, control cabinets and high-energy AC input protection applications.

34SK711 MOV varistor, also searched as 34S711, is a 34mm x 34mm square metal oxide varistor designed for high-energy transient overvoltage protection in AC and DC power circuits.


This model is suitable for 440VAC / 585VDC applications where engineers need a square MOV varistor with strong surge current capability, high energy absorption and stable clamping performance.


Replacement Quick Reference:

34SK711 can be used as a comparable replacement reference for the following TDK EPCOS LS41K series models:

• LS41K440QP

• LS41K440QPK2

• B72241L0441K100

• B72241L0441K102


All trademarks, brand names and part numbers are used for identification and comparison purposes only. This information does not imply any affiliation with, endorsement by, or authorization from TDK, EPCOS or TDK Electronics.


Application / Solution:

34SK711 is commonly used in surge protective devices (SPD), industrial electronics, power distribution systems, control cabinets, communication power equipment, AC input protection circuits, home appliances, gas and petroleum appliances, relay protection and electromagnetic valve surge absorption.


The square structure provides strong surge current handling and is suitable for high-energy protection circuits exposed to lightning surges, switching transients and unstable grid conditions.


Value for Engineers and Buyers:

34SK711 helps improve surge immunity, increase protection margin and reduce failure risk caused by transient overvoltage events.


HuaXingAn supports customers in three key areas:

* Quality Assurance: Maintain stable surge protection performance under strict product quality control.

* Cost Support: Help customers improve cost competitiveness as much as possible.

* Faster Delivery: Shorten lead time where possible to support urgent project schedules.


For sourcing and replacement projects, HuaXingAn provides datasheet support, sample evaluation, specification comparison, replacement analysis and model selection assistance to reduce verification time and purchasing risk.


Key Electrical Characteristics:

Varistor Voltage (1mA): 710V ±10%

Varistor Voltage Range: 640V to 780V

Maximum Continuous Voltage: 440VAC / 585VDC

Maximum Clamping Voltage: approx. 1180V

Clamping Current: 300A

Maximum Surge Current (8/20μs): approx. 50kA

Nominal Discharge Current (8/20μs): approx. 20kA

Maximum Energy: approx. 1280J

Operating Temperature: -40°C to +85°C

Storage Temperature: -40°C to +105°C


Mechanical Information:

Product Type: Square finished MOV varistor

Body Size: 34mm x 34mm square type

Typical Thickness: approx. 6.6mm max

Packaging: Foam box bulk pack


Application Focus

Surge Protective Devices (SPD)

Industrial power systems

Power distribution equipment

Control cabinets

Communication power systems

AC input surge protection

Relay and electromagnetic valve protection

High-energy surge protection circuits


Design Tips:

* Confirm that the operating voltage remains below 440VAC / 585VDC

* Place the MOV close to the surge entry point or power input side

* Use suitable fuse, thermal protection or overcurrent protection

* Confirm creepage distance, clearance and thermal spacing in PCB or SPD design

* Verify surge waveform, repetition rate and energy requirements before final selection

* Validate the complete circuit under actual application conditions


Engineering Value:

The 50kA surge current capability and square MOV structure make 34SK711 suitable for demanding surge protection applications where standard disc MOV solutions may not provide enough protection margin.


Correct MOV selection helps improve system-level surge immunity, reduce field failures and support long-term reliability in industrial and SPD applications.


Specification / Comparison:

34SK711 is positioned in the 440VAC / 585VDC voltage class with 710V varistor voltage and 1180V clamping voltage, making it suitable for LS41K440 class replacement evaluation in surge protection applications.


The TDK EPCOS LS41K440QP and LS41K440QPK2 models are listed with 440VAC / 585VDC, 715V varistor voltage and 1180V clamping voltage. HuaXingAn 34SK711 is specified with 710V varistor voltage, so the core voltage class and clamping level are very close for comparison and replacement evaluation.


Because datasheets are issued by different manufacturers, some parameters such as energy rating, capacitance, dimensions, terminal structure and test conditions may not be exactly the same.


Engineers should verify operating voltage, varistor voltage range, clamping voltage, surge current, energy rating, mechanical dimensions, mounting style, certification requirements and system safety margin before approving a replacement.


This page can support engineers and purchasing teams during 34SK711 specification review, square MOV varistor comparison, datasheet checking and replacement evaluation.


Related MOV Varistor Models:

34SK431 MOV Varistor

34SK511 MOV Varistor

34SK621 MOV Varistor

34SKxxx Series MOV Varistor


For 275VAC / 350VDC circuit applications, 34SK431 can be considered.

For 320VAC / 415VDC protection designs, 34SK511 is a common option.

For applications requiring a higher voltage step and stronger protection margin, 34SK621 may be selected.


For datasheet, quotation or sample request:

Email: sales@huaandz.com

WhatsApp: +86-134-2790-5674