
34S361K MOV varistor (360V), also searched as 34S361, is a 34mm x 34mm square metal oxide varistor designed for high-energy transient overvoltage protection in AC and DC power circuits.
This model is suitable for 230VAC / 300VDC applications where engineers need a square MOV varistor with strong surge current capability, high energy absorption and stable clamping performance.
Replacement Quick Reference:
34S361K can be used as a comparable replacement reference for the following TDK EPCOS LS40K series models:
• LS40K230QP
• LS40K230QPK2
• B72240L0231K100
• B72240L0231K102
All trademarks, brand names and part numbers are used for identification and comparison purposes only. This information does not imply any affiliation with, endorsement by, or authorization from TDK, EPCOS or TDK Electronics.
Application / Solution:
34S361K is commonly used in surge protective devices (SPD), industrial electronics, power distribution systems, control cabinets, communication power equipment, AC input protection circuits, home appliances, gas and petroleum appliances, relay protection and electromagnetic valve surge absorption.
The square structure provides strong surge current handling and is suitable for high-energy protection circuits exposed to lightning surges, switching transients and unstable grid conditions.
Value for Engineers and Buyers:
34S361K helps improve surge immunity, increase protection margin and reduce failure risk caused by transient overvoltage events.
HuaXingAn supports customers in three key areas:
* Quality Assurance: Maintain stable surge protection performance under strict product quality control.
* Cost Support: Help customers improve cost competitiveness as much as possible.
* Faster Delivery: Shorten lead time where possible to support urgent project schedules.
For sourcing and replacement projects, HuaXingAn provides datasheet support, sample evaluation, specification comparison, replacement analysis and model selection assistance to reduce verification time and purchasing risk.
Key Electrical Characteristics:
Varistor Voltage (1mA): 360V ±10%
Varistor Voltage Range: 324V to 396V
Maximum Continuous Voltage: 230VAC / 300VDC
Maximum Clamping Voltage: approx. 595V
Clamping Current: 300A
Maximum Surge Current (8/20μs): approx. 40kA
Nominal Discharge Current (8/20μs): approx. 20kA
Maximum Energy: approx. 730J
Operating Temperature: -40°C to +85°C
Storage Temperature: -40°C to +125°C
Mechanical Information:
Product Type: Square finished MOV varistor
Body Size: 34mm x 34mm square type
Typical Thickness: approx. 4.9mm max
Packaging: Foam box bulk pack
Application Focus:
Surge Protective Devices (SPD)
Industrial power systems
Power distribution equipment
Control cabinets
Communication power systems
AC input surge protection
Relay and electromagnetic valve protection
High-energy surge protection circuits
Design Tips:
* Confirm that the operating voltage remains below 230VAC / 300VDC
* Place the MOV close to the surge entry point or power input side
* Use suitable fuse, thermal protection or overcurrent protection
* Confirm creepage distance, clearance and thermal spacing in PCB or SPD design
* Verify surge waveform, repetition rate and energy requirements before final selection
* Validate the complete circuit under actual application conditions
Engineering Value:
The 40kA surge current capability and square MOV structure make 34S361K suitable for demanding surge protection applications where standard disc MOV solutions may not provide enough protection margin.
Correct MOV selection helps improve system-level surge immunity, reduce field failures and support long-term reliability in industrial and SPD applications.
Specification / Comparison:
34S361K is positioned in the 230VAC / 300VDC voltage class with 360V varistor voltage and 595V clamping voltage, making it suitable for LS40K230 class replacement evaluation in surge protection applications.
Because datasheets are issued by different manufacturers, some parameters such as energy rating, capacitance, dimensions, terminal structure and test conditions may not be exactly the same.
Engineers should verify operating voltage, varistor voltage range, clamping voltage, surge current, energy rating, mechanical dimensions, mounting style, certification requirements and system safety margin before approving a replacement.
This page can support engineers and purchasing teams during 34S361K specification review, square MOV varistor comparison, datasheet checking and replacement evaluation.
Related MOV Varistor Models:
For 275VAC / 350VDC circuit applications, 34S431K can be considered.
For 320VAC / 415VDC protection designs, 34S511K is a common option.
For applications requiring a higher voltage step and stronger protection margin, 34S621K may be selected.
For datasheet, quotation or sample request:
Email: sales@huaandz.com
WhatsApp: +86-134-2790-5674