
34S102K MOV varistor (1000V), also searched as 34S102, is a 34mm x 34mm square metal oxide varistor designed for high-energy transient overvoltage protection in AC and DC power circuits.
This model is suitable for 625VAC / 825VDC applications where engineers need a square MOV varistor with strong surge current capability, stable clamping performance and reliable energy absorption.
Replacement Quick Reference:
34S102K can be used as a comparable replacement reference for the following YAGEO KS34 series model:
• 102KS34
All trademarks, brand names and part numbers are used for identification and comparison purposes only. This information does not imply any affiliation with, endorsement by, or authorization from YAGEO.
Application / Solution:
34S102K is commonly used in surge protective devices, industrial electronics, power distribution systems, control cabinets, communication power equipment, AC/DC input protection circuits, high-voltage power equipment, relay protection and electromagnetic valve surge absorption.
The 34mm square MOV structure provides strong surge current handling and is suitable for protection circuits exposed to lightning surges, switching transients and unstable power conditions.
Value for Engineers and Buyers:
34S102K helps improve surge immunity, increase protection margin and reduce failure risk caused by transient overvoltage events.
HuaXingAn supports customers in three key areas:
* Quality Assurance: Maintain stable surge protection performance under strict product quality control.
* Cost Support: Help customers improve cost competitiveness as much as possible.
* Faster Delivery: Shorten lead time where possible to support urgent project schedules.
For sourcing and replacement projects, HuaXingAn provides datasheet support, sample evaluation, specification comparison, replacement analysis and model selection assistance to reduce verification time and purchasing risk.
Key Electrical Characteristics:
Varistor Voltage (1mA): 1000V ±10%
Varistor Voltage Range: 900V to 1100V
Maximum Continuous Voltage: 625VAC / 825VDC
Maximum Clamping Voltage: approx. 1650V
Clamping Current: 300A
Maximum Surge Current (8/20μs): approx. 40kA
Nominal Discharge Current (8/20μs): approx. 20kA
Maximum Energy: approx. 1530J
Operating Temperature: -40°C to +85°C
Storage Temperature: -40°C to +125°C
Mechanical Information:
Product Type: Square finished MOV varistor
Body Size: 34mm x 34mm square type
Typical Thickness: approx. 8.1mm max
Packaging: Foam box bulk pack
Application Focus:
Surge protective devices
Industrial electronics
High-voltage AC/DC input protection
Power distribution equipment
Control cabinets
Communication power systems
Relay and electromagnetic valve protection
High-energy transient overvoltage protection
Design Tips:
* Confirm that the operating voltage remains below 625VAC / 825VDC
* Place the MOV close to the surge entry point or power input side
* Use suitable fuse, thermal protection or overcurrent protection
* Confirm creepage distance, clearance and thermal spacing in PCB or SPD design
* Verify surge waveform, repetition rate and energy requirements before final selection
* Validate the complete circuit under actual application conditions
Engineering Value:
The 40kA surge current capability and 34mm square MOV structure make 34S102K suitable for high-voltage surge protection applications where stronger surge handling is required than many smaller disc MOV solutions.
Correct MOV selection helps improve system-level surge immunity, reduce field failures and support long-term reliability in industrial and SPD applications.
Specification / Comparison:
34S102K is positioned in the 625VAC / 825VDC voltage class with 1000V varistor voltage and 1650V clamping voltage, making it suitable for 102KS34 class replacement evaluation in surge protection applications.
Because datasheets are issued by different manufacturers, some parameters such as energy rating, capacitance, dimensions, terminal structure and test conditions may not be exactly the same.
Engineers should verify operating voltage, varistor voltage range, clamping voltage, surge current, energy rating, mechanical dimensions, mounting style, certification requirements and system safety margin before approving a replacement.
This page can support engineers and purchasing teams during 34S102K specification review, 34S102 comparison, square MOV varistor datasheet checking and YAGEO KS34 cross reference evaluation.
Related MOV Varistor Models:
For 275VAC / 350VDC circuit applications, 34S431K can be considered.
For 320VAC / 415VDC protection designs, 34S511K is a common option.
For applications requiring a higher voltage step and stronger protection margin, 34S621K may be selected.
For datasheet, quotation or sample request:
Email: sales@huaandz.com
WhatsApp: +86-134-2790-5674